C/C Composite Applications, Features and Dimensions
| C/C type | Grade | Application | Features | Dimensions (mm) |
| 2DC/C | CX-741 | Material for heat-treatment furnace Thermal insulation protection plate |
Large-scale flat plate can be produced with thin sheet. | 1000*1000*0.8,1.2,2,2.5,3,3.5,5,6,8,10,15,20 |
| CX-761 | Material for heat-treatment furnace Thermal insulation protection board Material for the glass manufacturing |
Manufacturing of large size thick flat plate is possible with high mechanical strength. | 1000*1000*0.8,1.2,2,2.5,3,3.5,5,6,8,10,15,20 φ1400*15, Other custom-sizes |
|
| CX-31 | Bolt / Nut Material for the glass manufacturing |
Processing of a screw etc. is possible using CF cloth of fine textile. | 300*300*3.2,6.4,9.5,12,17,22,27,32,40 Other custom-sizes |
|
| C/C201 |
Material for heat-treatment furnace and Bolt / Nut Heater, connectoin board and Jig Material for the glass manufacturing Hot Plate Spacer |
Manufacturing of a large size plate and a disk is possible having high mechanical strength. The degree of flatness and a status of surface are good. |
1020*970*1,2,3,4,5,6,8,10,12 970*720*1,2,3,4,5,6,8,10,12 |
|
| C/C501 | The degree of plane and a status of surface are good. Bolt / Nut |
Especially mechanical strenght is high and is most suitable for the connection bolt which needs high screw thread strength. | 300*300*20 and other | |
| CX-47 | Inner Shield Cylindrical Shape Components |
Manufacturing of a large-sized cylinder shape part is possible with thin thickness. | φ1200*φ1190*900 Other custom-sizes |
|
| FWC/C | CX-510V | CZ crucible |
It is excellent in dimensional stability by high intensity and strength also even with thin thickness. Reactivity with SiO gas is low. |
CZ crucible 〜40" Each size |
| C/CFW | Hot Press Mold | High tensile strength in the direction of the circumference and less dimensional change. | φ950×800ｈ thickness : 20〜150t |
|
| CX-55 | Protection cylinder Reinforced ring |
Small cylinder shape | ||
| Felt C/C | CX-2002U | High temperature conductivity material The first opposing nuclear fusion plasma wall Armagh material for ion implantation |
The thermal conductivity is high, and it is excellent in the errosion characteristic over the plasma and ion/electron beam. | 40*250*40 35*150*120 Other custom-sizes |
C/C Composite Physical and Mechanical Properties
| C/C type | Grade | Bulk Density （Mg/m3） |
Flexural strength （MPａ） |
Compressive strength （MPａ） |
Tensile strength （MPａ） |
Electrical resistivity （μΩ･m） |
Coefficient of thermal expansion RT〜1273K （10-6/K） |
Thermal conductivity （W/（m･K）） |
Ash content （mass%） |
||
| - | （⊥） | （⊥） | （//） | （//） | （//） | （⊥） | （//） | （⊥） | - | ||
| 2DC/C | CX-741 | 1.51 | 140 | 260 | - | 23 | <1 | 8.1 | 35 | 6 | 0.02 |
| CX-761 | 1.58 | 185 | 260 | 230 | 20 | <1 | 8.4 | 44 | 9 | 0.02 | |
| CX-31 | 1.61 | 90 | 249 | 98 | 22 | <1 | 4.1 | 31 | 12 | 0.02 | |
| C/C201 | 1.50 | 147 | 255 | 127 | 30 | <1 | 8.2 | 20 | 5 | - | |
| C/C501 | 1.50 | 216 | 255 | 147 | 29 | <1 | - | 20 | 5 | - | |
| CX-47 | 1.52 | 140 | 250 | - | 23 | <1 | 8 | 35 | 6 | 0.02 | |
| FWC/C | CX-510V | 1.57 | 195 | 205 | 290 | 13 | <1 | 7 | - | 7 | <10ppm |
| C/CFW | 1.50 | 245 | 147 | 245 | 12 | 1.5〜2.0 | - | 30 | 5 | - | |
| CX-55 | 1.60 | 195 | 124 | 290 | 11 | <1 | 7.4 | - | 7 | 0.02 | |
| Felt C/C | CX-2002U | 1.65 | 47,43,17 （X,Y,Z) |
48,45,52 （X,Y,Z) |
35,30,11 （X,Y,Z) |
2.7,3.4,5.1 （X,Y,Z) |
1.7,2.3 （X,Y) |
5.3 （Z) |
390,320 （X,Y) |
190 （Z) |
<10ppm |
※The specific heat is extracted from other publications.
※The figures above are typical values, and are not guaranteed.
Before actually using one of our products, please refer to our catalogue and be sure to contact our sales department to consult on selecting the most appropriate grade.
